HP Copier Repair Service in Mississauga NYIf you're going to buy a copy machine, you may have heard a lot of different terms thrown around, like new, used, remanufactured, and refurbished. Not knowing the difference between these terms can dramatically affect how much you pay for your copier. Read on to learn the difference between a refurbished copier and a used copier.NewYou probably know this one already, but a new copier is brand new, and comes directly from an authorized channel, like a dealer. The phrase "authorized channel" sounds pretty fancy, but all it really means is that the manufacturer's representative receives commission on the sale. Just like a new car, new copiers lose a lot of value as soon as they "leave the lot." Generally if you want a brand new copier, your best and most inexpensive option is through a copier leasing program rather than outright buying it.RefurbishedRefurbished copy machines have been audited, cleaned, tested, and updated by a third party (not the manufacturer). Most refurbished copiers have been used less than three months as rated by their respective manufacturer's recommended monthly usage tables, and come with a "same as brand new" warranty. Best of all, these copiers are sold at discount levels up to 75% off MSRP. If you choose this option, just make sure that the company you buy from as a good reputation and an A-rating with the Better Business Bureau.RemanufacturedManufacturers sell refurbished copiers too, but they like to call them remanufactured, which means the copy machine was refurbished by the manufacturer itself and not a third party. Remanufacturing means that the manufacturer tested and updated the equipment. As with the refurbished copiers, these copy machines are usually have less than three months of use, and have been acquired from off-lease contracts, sales demos, short term rentals and/or corporate downsizingUsedUsed generally refers to a copy machine that is being sold without any repairs, updates, cleaning and limited testing. When you see a copier sold as used, without a warranty, most likely you're getting it "as-is" and should be aware of the risk you are taking. Some unscrupulous companies might sell copy machines as "used" that should actually be sold for parts.For the best deal on a copy machine for your business or office, your best choice may be a remanufactured or refurbished copier that comes with a warranty. That way you are spending a lot less money while still benefiting from the protection of a warranty.
- Copier Sales
- Copier Repair Service
- Laser Printer Sales
- Laser Printer Repair Service
- Office Equipment Supplier
Copier & Laser Printer Brands We Service & Support
XEROX • CANON • BROTHER • HP • KYOCERA • RICOH • KONICA MINOLTA • COPYSTAR • SAMSUNG • SHARP • MOST OTHER MAJOR BRANDS
HP Copier Repair Service Mississauga – We’ve been providing business copiers for a long time, and over the years, the most common complaint we hear about typical copier sales people is that they are pushy, fast-talking, and might as well sell used cars instead of copiers (no offense, car guys).
When it’s time to buy a copier, customers are often presented with complicated agreements, hard deadlines, limited time offers, and extra features they don’t need! This leaves you with an over priced, over hyped copier. Don’t pay extra!
We want to be the best service provider you’ve ever had! Give us a try and see why our customers give us such great reviews. With our knowledge and experience, we can help you choose the right digital copier for your needs.
Choose a fully loaded multifunctional unit for printing, copying, scanning, and fax – or something more basic. There are many options to choose from, enabling you to custom outfit your copier to meet your exact needs for your wireless network, Ethernet, duplex printing, wide format, or other special needs. We also have repair service and toner cartridge consumables available too, for monochrome and color copiers.
What's The Difference Between A Refurbished Copier And A Used Copier?It hasn't always been so easy to make copies. We now can just walk up to a photocopier machine and press the print button and we instantly receive perfectly replicated copies of our original. Just forty seven years ago the copy machine was a pen and some sheets of carbon paper. Instead of pushing a button you had to write and write and then write some more! Just before the 60's this was a reality and carbon paper was a big seller. Chester Carlson, a patent attorney knew how much of a pain it was to continue rewriting everything by hand because Carlson had arthritis. Carlson had an idea of designing a machine that would automatically make copies, so he didn't have to do all of that copying by hand.Think about doing your job without a copier. You probably will have a hard time imagining it. Did you know that most manufacturers didn't think that a copier would be of much use? Chester tried for years to get people to catch his vision but nobody was interested. Between 1939 and 1944, Carlson got the thumbs down by many corporations, including IBM, Kodak, General Electric, and RCA.In 1937 Chester invented a process called electrophotography. They renamed it Xerography in 1938. He figured out that if the image of an original document was projected onto a photoconductive surface, current would flow only in the areas where the light shined on it. The first copy was made with a sulfur coating on a zinc plate. He took a glass microscope slide and wrote on it 10-22-38 ASTORIA with ink. He then pulled down the shade to darken the room. He built an electrostatic charge buy rubbing the sulfur surface with a handkerchief. Then the slide was placed on the surface and a light was shined on it for few seconds. He then sprinkled lycopodium powder on the sulfur coating. Gently blowing on the surface, the loose powder blew off and all that was left was the inscription, 10-22-38 ASTORIA. 10-22-38 is the date that the first photocopy was made. Astoria was the location.The Birth of Xerox The company that decided to take a chance on Carlson's dream was the Haloid Company. Haloid was a photo-paper manufacturer in New York. Guess what they came to be known as? Yes, the Xerox Corporation. In 1960 the first office copier was produced. It was the Xerox model 914. It was the first office copier that could make copies on plain paper.Being a copier repairman for over twenty years I have seen the good copiers with the bad copiers. I began working on copiers in 1983. The copiers that I began working with were messy and they would not last long in between servicing. The prices for the machines were very high especially for higher volume copiers. There were some interesting ways of transporting the paper through the machine like the Sharp SF-740. It grabbed the paper with two gripper devices that were driven with chains. This machine fused the toner to the paper with a toaster oven type device.Some people may even remember having to pour toner into the copier from a bottle. But today's copiers have a cartridge system that works well. They keep most of the toner inside the copier, not on you best pair of slacks or your dress. They have rollers for fusing the toner to the paper and have very sophisticated paper feed and transport systems that help reduce jamming problems. Digital copiers are now on the market. Now you can not only copy, but print, scan and even fax with them. Perhaps the most revolutionary change in the industry is the full color copier. The sales of full color copiers have really started to explode. There are a lot of new and exciting products being introduced and the quality is really quite good. We have come along way from Carlson's '10-22-38 ASTORIA. I just can't help to think what the future will bring us. What will the copier of the year 2020 look like?Chestor F. Carlson (1906-1968). Chester F. Carlson was born on February 8, 1906 in city of Seattle. His father was a barber and they came to live in San Bernardino, California. He was a bright young man and was curious of how things worked. Carlson's mom died when he was seventeen years old. They say that Carlson donated $100 million to charity before he passed away in 1968.
Laser Printer Maintenance TipsMississauga
Looking for HP Copier Repair Service Mississauga?A printer is an expensive appliance. Specifically, if you have got a laser printer, then the cost involved is higher than that of an inkjet printer. A laser printer, its cartridges, and its maintenance and service - everything is super pricy.Even a single act of negligence may lead to increased cost of printing in addition to unexpected work delays.Using the following best practices you will be able to avoid seeing a laser printer repair service -Buy refurbished device and accessories vigilantly.The rise of the environment protection movement has propelled the sale of refurbished items. Due to the low price factor, people are choosing refurbished printer and accessories more than ever.Recycled products can be good only if they have been re-processed by renowned brands or brand-authorized manufacturing plants. If a third-party manufacturer has been involved in the recycling processes, there is no way you will get original-like quality from your appliance.Similarly, if you are buying a recycled cartridge, do check if it is compatible to work with your printer. Otherwise, it might damage your printer permanently. Here also, I will say, you should buy replacement cartridges from the brand store or brand-authorized vendors only.Do not use ammonia-based cleaners for cleaning and shining up your printer.Better you should use isopropyl or ethyl alcohol to clean your printer. Just dampen a cloth with any of these solutions and gently rub the outer surface of your printer.There is no need to wipe or clean the inner parts of your printer. However, if you see dust particles on the roller or any other part of the paper path, then clean it with a dry cotton cloth.Do use your printer.Home printers have low printing requirements. That's the reason why most home printers give out dull prints.Your printer's toner or ink loses its pigment if it is not used frequently. To maintain the color, you should take a few prints every week.Place your printer in a dust free environment.Do not place your device at a location which is exposed to dust, direct sunlight, and moisture. These are the three biggest enemies of your printer. When not in use, cover your printer with a large plastic sheet.If you are using your printer after a long time, then it would be wise to take out the papers first, tap them on the table top one or two times, and re-insert the bundle into the paper tray. If there is dust on the paper, it might get clogged while printing.Hire the best service available, not the cheapest available.When it comes to the health and performance of your device, you should hire a trusted on-site laser printer service in your city. Doing so will allow you to prevent your printer from going into unskilled hands.If you are asking for printer repair service from an individual just because he lives nearby, it could cancel your printer's warranty document.There you have it. These are some of the preventive tips that will improve the performance and prolong the span of your printer.If you have a cool tip that could help prevent a laser printer from damages and downtimes, do share it in the comments section.
Konica Minolta Copy Machine Repair Service Mississauga NY – Office Equipment Solutions
We carry multiple brands and a wide range of new copiers, used copiers, and refurbished copiers to fit every need, in both color or black and white models. From desktop to copy room, and every size in between, you can be sure we’ll have the right office copier at the right price for you. HP Copier Repair Service Mississauga
We’ve also got you covered for copier service, too. Our trained technicians will provide you with prompt, professional service on your office copiers. From one copier to an entire fleet, our service programs and maintenance agreements are customizable to fit your exacting needs.