Samsung Printer Repair Service in St. Catharines NYIf you're going to buy a copy machine, you may have heard a lot of different terms thrown around, like new, used, remanufactured, and refurbished. Not knowing the difference between these terms can dramatically affect how much you pay for your copier. Read on to learn the difference between a refurbished copier and a used copier.NewYou probably know this one already, but a new copier is brand new, and comes directly from an authorized channel, like a dealer. The phrase "authorized channel" sounds pretty fancy, but all it really means is that the manufacturer's representative receives commission on the sale. Just like a new car, new copiers lose a lot of value as soon as they "leave the lot." Generally if you want a brand new copier, your best and most inexpensive option is through a copier leasing program rather than outright buying it.RefurbishedRefurbished copy machines have been audited, cleaned, tested, and updated by a third party (not the manufacturer). Most refurbished copiers have been used less than three months as rated by their respective manufacturer's recommended monthly usage tables, and come with a "same as brand new" warranty. Best of all, these copiers are sold at discount levels up to 75% off MSRP. If you choose this option, just make sure that the company you buy from as a good reputation and an A-rating with the Better Business Bureau.RemanufacturedManufacturers sell refurbished copiers too, but they like to call them remanufactured, which means the copy machine was refurbished by the manufacturer itself and not a third party. Remanufacturing means that the manufacturer tested and updated the equipment. As with the refurbished copiers, these copy machines are usually have less than three months of use, and have been acquired from off-lease contracts, sales demos, short term rentals and/or corporate downsizingUsedUsed generally refers to a copy machine that is being sold without any repairs, updates, cleaning and limited testing. When you see a copier sold as used, without a warranty, most likely you're getting it "as-is" and should be aware of the risk you are taking. Some unscrupulous companies might sell copy machines as "used" that should actually be sold for parts.For the best deal on a copy machine for your business or office, your best choice may be a remanufactured or refurbished copier that comes with a warranty. That way you are spending a lot less money while still benefiting from the protection of a warranty.
- Copier Sales
- Copier Repair Service
- Laser Printer Sales
- Laser Printer Repair Service
- Office Equipment Supplier
Copier & Laser Printer Brands We Service & Support
XEROX • CANON • BROTHER • HP • KYOCERA • RICOH • KONICA MINOLTA • COPYSTAR • SAMSUNG • SHARP • MOST OTHER MAJOR BRANDS
Samsung Printer Repair Service St. Catharines – We’ve been providing business copiers for a long time, and over the years, the most common complaint we hear about typical copier sales people is that they are pushy, fast-talking, and might as well sell used cars instead of copiers (no offense, car guys).
When it’s time to buy a copier, customers are often presented with complicated agreements, hard deadlines, limited time offers, and extra features they don’t need! This leaves you with an over priced, over hyped copier. Don’t pay extra!
We want to be the best service provider you’ve ever had! Give us a try and see why our customers give us such great reviews. With our knowledge and experience, we can help you choose the right digital copier for your needs.
Choose a fully loaded multifunctional unit for printing, copying, scanning, and fax – or something more basic. There are many options to choose from, enabling you to custom outfit your copier to meet your exact needs for your wireless network, Ethernet, duplex printing, wide format, or other special needs. We also have repair service and toner cartridge consumables available too, for monochrome and color copiers.
Canon Copy MachinesSo you need ten sets of a fifty page document for this mornings meeting. It's 8:30AM and your meeting is at 9:00AM. You begin with your project and the copier jams. You clear the jam but it keeps jamming! It's not pulling in the paper. Sure you can call the repair person, but you need the copies now! There's nothing you can do, or is there?All office equipment that feeds paper has a component inside that pulls the paper out of the paper tray and into the machine. Most are made out of rubber and just like the tires on your car they wear out. When a roller is worn and dirty they will cause paper jams. The purpose of this article is to show you how you can clean or rejuvenate the rollers long enough for you to complete your job and have your repair person come out and fix it properly.Alternative solutionsWhen your machine is jamming, first locate where the paper is jamming. Which paper tray? Is it tray 1 or tray 2? Also which size is jamming? On machines that have more than one paper tray you can switch paper trays and then you can skip cleaning the rollers. Make sure when you change cassettes that the copier registers the correct size. The machine will think it is a different size and it will jam. The sensors are set for a specific timing and it will know the difference in length from letter size and legal size. I also would try using the bypass tray or manual feed tray if so equipped. This will get you up and running quicker than cleaning the rollers.Determining if the rollers are the problem:If you need the specific tray to be functional we will get busy with the repair.First make a single copy in the tray that is jamming. By doing this you are determining where the paper is jamming. If it is jamming in the exit for instance, you have another problem. If it is jamming in the center of the machine, again it is a different problem. But if it jams at the cassette or paper tray area the next step is removing the paper tray. Shine your flashlight into the paper feed area and see if there are any pieces of paper torn off inside or something blocking the paper path. Now that you have ruled out a blocked paper path, you can clean the feed roller(s).Tools Required:Flashlight, strong cotton towel (so it will not rip off in the machine), WD-40 or Rubber roller rejuvenator. Note: Never use alcohol to clean rollers. It dries out the tread and the remaining tread will get ripped off and then it still will not feed. Use WD-40 it works great!Cleaning the rollers:Shine your flashlight into the paper feed area and locate the rubber rollers that feed the paper in. Grab your towel and saturate it with cleaning fluid. This can be WD-40 or your favorite roller rejuvenator. Start by cleaning the roller and spinning it all the way around not missing any of the surfaces of the roller. Then go over it again with the dry part of the towel. As I said there are many different types. Some have a set of three rollers. One Pre-feed roller, this pushes the paper into the other rollers. One feed roller and one separation roller. Others have a half moon style. These are harder to clean because they have a clutch system that keeps it at home position when not feeding.WARNING: If you try and turn these to clean them you will damage the clutch mechanism! There are two ways you can clean these types. First you can actuate the clutch by pushing down on the solenoid or release lever. This sometimes can be hard to get to. You can also start the copy process and shut off the machine exactly when the feed roller engages. This takes some patience and practice but it is better than damaging the clutch. Once you get it where you can clean the roller repeat the procedure above.Some alternatives to replacing feed rollers: There is a material called feed roller tape. I have used it when I didn't have the right roller in my car stock. It works with some styles mainly half moon styles. Just peel off the adhesive and wrap it around the worn roller surface. They also have some that stretch over the old rollers. I have never used this but I have been told it will get you up and running. On old copiers or printers that you can no longer get parts for you can apply clear silicon on the feed surface and let it dry twenty four hours. It works but I am inclined to use the real thing. You can also use generic rollers manufactured for almost all equipment. I have mixed feeling about these because I have had to go back and change them again later. For the best repair I use genuine OEM feed rollers. They are still inexpensive and they will last you longer and you will have fewer headaches.Feed RollersThere are many types of rollers and feed systems. Here are some common feed rollers with their part numbers. Rollers will normally come in a maintenance kit but they may need to be replaced approximately half way through the maintenance kit cycle.HP LJ-4000 laser printerFeed RollersRG5-2651-000CN x 2Note: These are very easily replaced. Just unsnap them and replace them with the new roller.Toshiba E-Studio 350/450 Photocopier Paper Feed Rollers 44201807000 x2, 4400669910Note: These take a little more work. First you need to remove the paper feed assembly and then you can get to the clips that hold them on.I hope this has helped you complete your print or copy job. Please remember that this article is just a quick fix and not a long term solution. Be sure and call your repair person to fix it correctly.
What's Wrong With a Straight Commission Sales Job?St. Catharines
Looking for Samsung Printer Repair Service St. Catharines?Are you considering purchasing a used copier printer all-in-one office equipment from a company out or going out of business? You need to think a minute about this. The company is going out of business for a reason and the majority of the time it's because of cash flow.Do you think they would spend their last few dollars having their copier repaired or maintained? Buying a used copier printer from a company going out of business is like buying a used car from a dirt lot 100 miles from a city. It's buyer beware and check your pockets before you leave because the seller will be gone!Last week we received 11 service calls from companies who purchased used copier printers multi-function office equipment from a business going out of business. This is how most of the copier repair calls start: "Hi, I need somebody to come out to clean a copier because we are getting lines." or "Hi. we are getting paper jams and we need it fixed right away." Then the person tells us they just purchased the used copier at a great price from a business that failed. Now the company is gone and they can not get a hold of them.Do you think once you buy the used copier they will help you if a problem occurs? They sold you the used copier printer, closed the business and left town for the mountains.The bottom line is that the average repair on the clients' copiers cost more than what they paid for the used copier.How to prevent this problem:1. Contact a company who specializes in the used copier printer. Do not ask you neighbor doctor, nephew lawyer or next door electrician. Get a certified technician to review it.2. Have the copier repair tech check the following: last copier maintenance cycle, the amount of life left of the toner, developer and drum. Get an unbiased view from a technician who will give you a report before you spend a dime on the refurbished or used printer copier.3. Better yet, get the used copier printer from actual copier printer dealer. You may pay a few dollars more but it will prevent exposing yourself to problems and hundreds of dollars in repair bills later. May companies will give you a quick over the phone estimates of costs to check the equipment before you buy it. It only costs you a phone call and could save you hundreds of dollars!
Samsung Copy Machine Repair Service St. Catharines NY – Office Equipment Solutions
We carry multiple brands and a wide range of new copiers, used copiers, and refurbished copiers to fit every need, in both color or black and white models. From desktop to copy room, and every size in between, you can be sure we’ll have the right office copier at the right price for you. Samsung Printer Repair Service St. Catharines
We’ve also got you covered for copier service, too. Our trained technicians will provide you with prompt, professional service on your office copiers. From one copier to an entire fleet, our service programs and maintenance agreements are customizable to fit your exacting needs.