Ricoh Printer Service in Elma NYIf you are setting up an office, whether in a commercial building or at home, you will probably need a copier machine. One of the important decisions you will be making is whether you will go for a copier lease, or purchase one for yourself?Unless you will be needing multiple copies of documents everyday, generally, the better and more economical choice is a copier lease. Here are some of the reasons why:- Maintenance and repair of your own copier machine could turn out to be costlier and more time-consuming than you think. If you have a copier lease, regular maintenance will be provided for you and if you need the machine to be fixed, all you have to do is call the vendor and they will send a repair guy to you right away.- In the same way, when a part of your copier needs to be replaced, you may have to go to several stores before you find the exact part that you need...and then you have to install it yourself. If you have a copier lease, they will be the ones to look for a high-quality but low-cost copier part. True, you will have to pay for the part, but installation services are free.In addition, some copier leases also give you the benefit of free minor parts and free installation. Most companies will also provide you with a temporary unit while your own copier is undergoing repairs.- When the time comes when you want to change to a more advanced model, it will be very easy if you have a copier lease. Leasing companies are always willing to modify your lease and exchange your current machine with a newer model.On the other hand, if your copier machine was purchased, and you want to buy a new one, you will end up with two copier machines. Unless you have sufficient storage space, you will have the burden of looking for a buyer for your old unit, or dispose of it in some other way.In most cases, copier leases are really the more practical choice. It saves you money and is hassle-free.
- Copier Sales
- Copier Repair Service
- Laser Printer Sales
- Laser Printer Repair Service
- Office Equipment Supplier
Copier & Laser Printer Brands We Service & Support
XEROX • CANON • BROTHER • HP • KYOCERA • RICOH • KONICA MINOLTA • COPYSTAR • SAMSUNG • SHARP • MOST OTHER MAJOR BRANDS
Ricoh Printer Service Elma – We’ve been providing business copiers for a long time, and over the years, the most common complaint we hear about typical copier sales people is that they are pushy, fast-talking, and might as well sell used cars instead of copiers (no offense, car guys).
When it’s time to buy a copier, customers are often presented with complicated agreements, hard deadlines, limited time offers, and extra features they don’t need! This leaves you with an over priced, over hyped copier. Don’t pay extra!
We want to be the best service provider you’ve ever had! Give us a try and see why our customers give us such great reviews. With our knowledge and experience, we can help you choose the right digital copier for your needs.
Choose a fully loaded multifunctional unit for printing, copying, scanning, and fax – or something more basic. There are many options to choose from, enabling you to custom outfit your copier to meet your exact needs for your wireless network, Ethernet, duplex printing, wide format, or other special needs. We also have repair service and toner cartridge consumables available too, for monochrome and color copiers.
The Scroll Marked II - A Classic Read For Network MarketersUsed car warranties aren't always the best deal, and neither are so-called "extended warranties" on electronics such as computers, but when it comes to copier warranties you should always get one. Read on to learn why you should purchase a refurbished copy machine with a warranty.If you are looking to purchase a new or used copier but are concerned about the quality of local service, a copier warranty is the only way to ensure peace of mind with your purchase. Although you should always ensure that your refurbished copier is coming from a good place (most come from short term rentals, off-lease contracts, sales demos and corporate downsizing) and is in good condition (most have been used for less than three months), a warranty will ensure that if anything happens to it, the labor and parts will be covered.So why even bother purchasing refurbished discount copiers if you're so afraid about its condition you need a warranty? Copier machines are a lot like cars. As soon as they "leave the lot" they severely depreciate in value. But also just like cars, most times a used copy machine is just as good as a new one - in fact, it most likely as been rarely used at all.Because you can buy a refurbished copy machine at such discounted prices, you or your company will be able to afford a much better, top name brand copier than you might be able to buy otherwise.Buying a certified used copy machine is just plain a smart business decision. It will provide your company with the productivity it requires for many years down the road, but it won't come with the inflated costs of a brand new copy machine.When looking for a refurbished copier, it's important to find a reputable company to do business with. You want to only buy from a company with an A+ rating from the Better Business Bureau, and of course, ensure that they provide some kind of warranty with your new copier. Most companies will automatically provide a limited warranty (such as covering the first 90 days), but the best choice is a company that offers an extended warranty. The warranty should cover parts and labor, as well as cover all major circuit boards, motors, and scanning units.Don't pay full price for your office copy machine. Purchase a refurbished copier with a warranty and guarantee years of good service for up to 75% off MSRP.
This Is How You Keep Your Laser Printer Away From RepairsElma
Looking for Ricoh Printer Service Elma?So you need ten sets of a fifty page document for this mornings meeting. It's 8:30AM and your meeting is at 9:00AM. You begin with your project and the copier jams. You clear the jam but it keeps jamming! It's not pulling in the paper. Sure you can call the repair person, but you need the copies now! There's nothing you can do, or is there?All office equipment that feeds paper has a component inside that pulls the paper out of the paper tray and into the machine. Most are made out of rubber and just like the tires on your car they wear out. When a roller is worn and dirty they will cause paper jams. The purpose of this article is to show you how you can clean or rejuvenate the rollers long enough for you to complete your job and have your repair person come out and fix it properly.Alternative solutionsWhen your machine is jamming, first locate where the paper is jamming. Which paper tray? Is it tray 1 or tray 2? Also which size is jamming? On machines that have more than one paper tray you can switch paper trays and then you can skip cleaning the rollers. Make sure when you change cassettes that the copier registers the correct size. The machine will think it is a different size and it will jam. The sensors are set for a specific timing and it will know the difference in length from letter size and legal size. I also would try using the bypass tray or manual feed tray if so equipped. This will get you up and running quicker than cleaning the rollers.Determining if the rollers are the problem:If you need the specific tray to be functional we will get busy with the repair.First make a single copy in the tray that is jamming. By doing this you are determining where the paper is jamming. If it is jamming in the exit for instance, you have another problem. If it is jamming in the center of the machine, again it is a different problem. But if it jams at the cassette or paper tray area the next step is removing the paper tray. Shine your flashlight into the paper feed area and see if there are any pieces of paper torn off inside or something blocking the paper path. Now that you have ruled out a blocked paper path, you can clean the feed roller(s).Tools Required:Flashlight, strong cotton towel (so it will not rip off in the machine), WD-40 or Rubber roller rejuvenator. Note: Never use alcohol to clean rollers. It dries out the tread and the remaining tread will get ripped off and then it still will not feed. Use WD-40 it works great!Cleaning the rollers:Shine your flashlight into the paper feed area and locate the rubber rollers that feed the paper in. Grab your towel and saturate it with cleaning fluid. This can be WD-40 or your favorite roller rejuvenator. Start by cleaning the roller and spinning it all the way around not missing any of the surfaces of the roller. Then go over it again with the dry part of the towel. As I said there are many different types. Some have a set of three rollers. One Pre-feed roller, this pushes the paper into the other rollers. One feed roller and one separation roller. Others have a half moon style. These are harder to clean because they have a clutch system that keeps it at home position when not feeding.WARNING: If you try and turn these to clean them you will damage the clutch mechanism! There are two ways you can clean these types. First you can actuate the clutch by pushing down on the solenoid or release lever. This sometimes can be hard to get to. You can also start the copy process and shut off the machine exactly when the feed roller engages. This takes some patience and practice but it is better than damaging the clutch. Once you get it where you can clean the roller repeat the procedure above.Some alternatives to replacing feed rollers: There is a material called feed roller tape. I have used it when I didn't have the right roller in my car stock. It works with some styles mainly half moon styles. Just peel off the adhesive and wrap it around the worn roller surface. They also have some that stretch over the old rollers. I have never used this but I have been told it will get you up and running. On old copiers or printers that you can no longer get parts for you can apply clear silicon on the feed surface and let it dry twenty four hours. It works but I am inclined to use the real thing. You can also use generic rollers manufactured for almost all equipment. I have mixed feeling about these because I have had to go back and change them again later. For the best repair I use genuine OEM feed rollers. They are still inexpensive and they will last you longer and you will have fewer headaches.Feed RollersThere are many types of rollers and feed systems. Here are some common feed rollers with their part numbers. Rollers will normally come in a maintenance kit but they may need to be replaced approximately half way through the maintenance kit cycle.HP LJ-4000 laser printerFeed RollersRG5-2651-000CN x 2Note: These are very easily replaced. Just unsnap them and replace them with the new roller.Toshiba E-Studio 350/450 Photocopier Paper Feed Rollers 44201807000 x2, 4400669910Note: These take a little more work. First you need to remove the paper feed assembly and then you can get to the clips that hold them on.I hope this has helped you complete your print or copy job. Please remember that this article is just a quick fix and not a long term solution. Be sure and call your repair person to fix it correctly.
Samsung Copier Service Elma NY – Office Equipment Solutions
We carry multiple brands and a wide range of new copiers, used copiers, and refurbished copiers to fit every need, in both color or black and white models. From desktop to copy room, and every size in between, you can be sure we’ll have the right office copier at the right price for you. Ricoh Printer Service Elma
We’ve also got you covered for copier service, too. Our trained technicians will provide you with prompt, professional service on your office copiers. From one copier to an entire fleet, our service programs and maintenance agreements are customizable to fit your exacting needs.