Muratec Copier Repair in Burlington NY
It usually happens when you need to print out or copy important papers when your printer or copier breaks down and leaves you surprised and frustrated. It doesn’t matter what is the brand: Lexmark, Zebra, Dell, HP, Brother, Toshiba, Konica Minolta, Kyocera, or Panasonic – it happens to every brand sooner or later. Since copiers and printers are made of an extensive array of parts (the most problematic parts being plotters, toners, belts, carriage belts, trailing belts) and, it will be an arduous job to find a solution and put your printer or copier back into a working condition. You should think about calling professionals instead of trying to come up with a solution by yourself. Sometimes, printers jam the copiers and papers stop copying for no apparent reason but as in everything else there is a reason but not so obvious for an untrained mind. Usually, the repair firms charge unimaginable prices for their services and often, you will be better off if you buy a brand-new printer or copier which is usually will cost you much less than paying for those repair services.It’s not surprising for repair firms to charge the high prices for the services as there are myriads of details in the printer and copier which require years of work experience for the specialist to be able to get through all the details and eventually, to find a problem and fix it. On the other side, those who don’t wish to cover the repair invoice will have to buy a new machine. Buying a new printer or copier is associated with different set of problems that are obvious for someone who has been working in this industry for decades. The problem is that if you choose to buy a new printer or copier the cost of which is lower than the price for its repair then you will face the same tech problems which you faced before buying this machine: in other words, low-priced printers and copiers are made of low-quality materials and usually, they have comparatively shorter life-time than its high-end counterparts.Those who choose to ask the repair companies for help and don’t want to buy another low-quality printer or copier are the ones who make wiser choice. Besides the fact that repair services will remove the stress that usually comes along with an unexpected machine breakdown, they will give you professional suggestions to keep your printer or copier in a desirable working condition. They will provide you with the tips that you won’t find on internet. In addition, repair services will also handle the printer/copier resources like sheets and ink cartridges etc.
- Copier Sales
- Copier Repair Service
- Laser Printer Sales
- Laser Printer Repair Service
- Office Equipment Supplier
Copier & Laser Printer Brands We Service & Support
XEROX • CANON • BROTHER • HP • KYOCERA • RICOH • KONICA MINOLTA • COPYSTAR • SAMSUNG • SHARP • MOST OTHER MAJOR BRANDS
Muratec Copier Repair Burlington – We’ve been providing business copiers for a long time, and over the years, the most common complaint we hear about typical copier sales
people is that they are pushy, fast-talking, and might as well sell used cars instead of copiers (no offense, car guys).
When it’s time to buy a copier
, customers are often presented with complicated agreements, hard deadlines, limited time offers, and extra features they don’t need! This leaves you with an over priced, over hyped copier. Don’t pay extra!
We want to be the best service provider you’ve ever had! Give us a try and see why our customers give us such great reviews. With our knowledge and experience
, we can help you choose the right digital copier for your needs.
Choose a fully loaded multifunctional unit for printing, copying,
scanning, and fax – or something more basic. There are many options to choose from, enabling you to custom outfit your copier to meet your exact needs for your wireless network, Ethernet, duplex printing, wide format, or other special needs. We also have repair service and toner cartridge consumables available too, for monochrome and color copiers.
It hasn’t always been so easy to make copies. We now can just walk up to a photocopier machine and press the print button and we instantly receive perfectly replicated copies of our original. Just forty seven years ago the copy machine was a pen and some sheets of carbon paper. Instead of pushing a button you had to write and write and then write some more! Just before the 60’s this was a reality and carbon paper was a big seller. Chester Carlson, a patent attorney knew how much of a pain it was to continue rewriting everything by hand because Carlson had arthritis. Carlson had an idea of designing a machine that would automatically make copies, so he didn’t have to do all of that copying by hand.Think about doing your job without a copier. You probably will have a hard time imagining it. Did you know that most manufacturers didn’t think that a copier would be of much use? Chester tried for years to get people to catch his vision but nobody was interested. Between 1939 and 1944, Carlson got the thumbs down by many corporations, including IBM, Kodak, General Electric, and RCA.In 1937 Chester invented a process called electrophotography. They renamed it Xerography in 1938. He figured out that if the image of an original document was projected onto a photoconductive surface, current would flow only in the areas where the light shined on it. The first copy was made with a sulfur coating on a zinc plate. He took a glass microscope slide and wrote on it 10-22-38 ASTORIA with ink. He then pulled down the shade to darken the room. He built an electrostatic charge buy rubbing the sulfur surface with a handkerchief. Then the slide was placed on the surface and a light was shined on it for few seconds. He then sprinkled lycopodium powder on the sulfur coating. Gently blowing on the surface, the loose powder blew off and all that was left was the inscription, 10-22-38 ASTORIA. 10-22-38 is the date that the first photocopy was made. Astoria was the location.The Birth of Xerox The company that decided to take a chance on Carlson’s dream was the Haloid Company. Haloid was a photo-paper manufacturer in New York. Guess what they came to be known as? Yes, the Xerox Corporation. In 1960 the first office copier was produced. It was the Xerox model 914. It was the first office copier that could make copies on plain paper.Being a copier repairman for over twenty years I have seen the good copiers with the bad copiers. I began working on copiers in 1983. The copiers that I began working with were messy and they would not last long in between servicing. The prices for the machines were very high especially for higher volume copiers. There were some interesting ways of transporting the paper through the machine like the Sharp SF-740. It grabbed the paper with two gripper devices that were driven with chains. This machine fused the toner to the paper with a toaster oven type device.Some people may even remember having to pour toner into the copier from a bottle. But today’s copiers have a cartridge system that works well. They keep most of the toner inside the copier, not on you best pair of slacks or your dress. They have rollers for fusing the toner to the paper and have very sophisticated paper feed and transport systems that help reduce jamming problems. Digital copiers are now on the market. Now you can not only copy, but print, scan and even fax with them. Perhaps the most revolutionary change in the industry is the full color copier. The sales of full color copiers have really started to explode. There are a lot of new and exciting products being introduced and the quality is really quite good. We have come along way from Carlson’s ’10-22-38 ASTORIA. I just can’t help to think what the future will bring us. What will the copier of the year 2020 look like?Chestor F. Carlson (1906-1968). Chester F. Carlson was born on February 8, 1906 in city of Seattle. His father was a barber and they came to live in San Bernardino, California. He was a bright young man and was curious of how things worked. Carlson’s mom died when he was seventeen years old. They say that Carlson donated $100 million to charity before he passed away in 1968.
Looking for Muratec Copier Repair Burlington?
Used car warranties aren’t always the best deal, and neither are so-called “extended warranties” on electronics such as computers, but when it comes to copier warranties you should always get one. Read on to learn why you should purchase a refurbished copy machine with a warranty.If you are looking to purchase a new or used copier but are concerned about the quality of local service, a copier warranty is the only way to ensure peace of mind with your purchase. Although you should always ensure that your refurbished copier is coming from a good place (most come from short term rentals, off-lease contracts, sales demos and corporate downsizing) and is in good condition (most have been used for less than three months), a warranty will ensure that if anything happens to it, the labor and parts will be covered.So why even bother purchasing refurbished discount copiers if you’re so afraid about its condition you need a warranty? Copier machines are a lot like cars. As soon as they “leave the lot” they severely depreciate in value. But also just like cars, most times a used copy machine is just as good as a new one – in fact, it most likely as been rarely used at all.Because you can buy a refurbished copy machine at such discounted prices, you or your company will be able to afford a much better, top name brand copier than you might be able to buy otherwise.Buying a certified used copy machine is just plain a smart business decision. It will provide your company with the productivity it requires for many years down the road, but it won’t come with the inflated costs of a brand new copy machine.When looking for a refurbished copier, it’s important to find a reputable company to do business with. You want to only buy from a company with an A+ rating from the Better Business Bureau, and of course, ensure that they provide some kind of warranty with your new copier. Most companies will automatically provide a limited warranty (such as covering the first 90 days), but the best choice is a company that offers an extended warranty. The warranty should cover parts and labor, as well as cover all major circuit boards, motors, and scanning units.Don’t pay full price for your office copy machine. Purchase a refurbished copier with a warranty and guarantee years of good service for up to 75% off MSRP.
Okidata Copier Repair Burlington NY – Office Equipment Solutions
We carry multiple brands and a wide range of new copiers, used copiers, and refurbished copiers to fit every need, in both color or black and white models. From desktop to copy room, and every size in between, you can be sure we’ll have the right office copier at the right price for you. Muratec Copier Repair Burlington
We’ve also got you covered for copier service, too. Our trained technicians will provide you with prompt, professional service on your office copiers. From one copier to an entire fleet, our service programs and maintenance agreements are customizable to fit your exacting needs.
Copiers & Laser Printers