HP Copier Repair Service in Mississauga NYIt usually happens when you need to print out or copy important papers when your printer or copier breaks down and leaves you surprised and frustrated. It doesn't matter what is the brand: Lexmark, Zebra, Dell, HP, Brother, Toshiba, Konica Minolta, Kyocera, or Panasonic - it happens to every brand sooner or later. Since copiers and printers are made of an extensive array of parts (the most problematic parts being plotters, toners, belts, carriage belts, trailing belts) and, it will be an arduous job to find a solution and put your printer or copier back into a working condition. You should think about calling professionals instead of trying to come up with a solution by yourself. Sometimes, printers jam the copiers and papers stop copying for no apparent reason but as in everything else there is a reason but not so obvious for an untrained mind. Usually, the repair firms charge unimaginable prices for their services and often, you will be better off if you buy a brand-new printer or copier which is usually will cost you much less than paying for those repair services.It's not surprising for repair firms to charge the high prices for the services as there are myriads of details in the printer and copier which require years of work experience for the specialist to be able to get through all the details and eventually, to find a problem and fix it. On the other side, those who don't wish to cover the repair invoice will have to buy a new machine. Buying a new printer or copier is associated with different set of problems that are obvious for someone who has been working in this industry for decades. The problem is that if you choose to buy a new printer or copier the cost of which is lower than the price for its repair then you will face the same tech problems which you faced before buying this machine: in other words, low-priced printers and copiers are made of low-quality materials and usually, they have comparatively shorter life-time than its high-end counterparts.Those who choose to ask the repair companies for help and don't want to buy another low-quality printer or copier are the ones who make wiser choice. Besides the fact that repair services will remove the stress that usually comes along with an unexpected machine breakdown, they will give you professional suggestions to keep your printer or copier in a desirable working condition. They will provide you with the tips that you won't find on internet. In addition, repair services will also handle the printer/copier resources like sheets and ink cartridges etc.
- Copier Sales
- Copier Repair Service
- Laser Printer Sales
- Laser Printer Repair Service
- Office Equipment Supplier
Copier & Laser Printer Brands We Service & Support
XEROX • CANON • BROTHER • HP • KYOCERA • RICOH • KONICA MINOLTA • COPYSTAR • SAMSUNG • SHARP • MOST OTHER MAJOR BRANDS
HP Copier Repair Service Mississauga – We’ve been providing business copiers for a long time, and over the years, the most common complaint we hear about typical copier sales people is that they are pushy, fast-talking, and might as well sell used cars instead of copiers (no offense, car guys).
When it’s time to buy a copier, customers are often presented with complicated agreements, hard deadlines, limited time offers, and extra features they don’t need! This leaves you with an over priced, over hyped copier. Don’t pay extra!
We want to be the best service provider you’ve ever had! Give us a try and see why our customers give us such great reviews. With our knowledge and experience, we can help you choose the right digital copier for your needs.
Choose a fully loaded multifunctional unit for printing, copying, scanning, and fax – or something more basic. There are many options to choose from, enabling you to custom outfit your copier to meet your exact needs for your wireless network, Ethernet, duplex printing, wide format, or other special needs. We also have repair service and toner cartridge consumables available too, for monochrome and color copiers.
Printer and Copier Repair Can Be FrustratingSo you need ten sets of a fifty page document for this mornings meeting. It's 8:30AM and your meeting is at 9:00AM. You begin with your project and the copier jams. You clear the jam but it keeps jamming! It's not pulling in the paper. Sure you can call the repair person, but you need the copies now! There's nothing you can do, or is there?All office equipment that feeds paper has a component inside that pulls the paper out of the paper tray and into the machine. Most are made out of rubber and just like the tires on your car they wear out. When a roller is worn and dirty they will cause paper jams. The purpose of this article is to show you how you can clean or rejuvenate the rollers long enough for you to complete your job and have your repair person come out and fix it properly.Alternative solutionsWhen your machine is jamming, first locate where the paper is jamming. Which paper tray? Is it tray 1 or tray 2? Also which size is jamming? On machines that have more than one paper tray you can switch paper trays and then you can skip cleaning the rollers. Make sure when you change cassettes that the copier registers the correct size. The machine will think it is a different size and it will jam. The sensors are set for a specific timing and it will know the difference in length from letter size and legal size. I also would try using the bypass tray or manual feed tray if so equipped. This will get you up and running quicker than cleaning the rollers.Determining if the rollers are the problem:If you need the specific tray to be functional we will get busy with the repair.First make a single copy in the tray that is jamming. By doing this you are determining where the paper is jamming. If it is jamming in the exit for instance, you have another problem. If it is jamming in the center of the machine, again it is a different problem. But if it jams at the cassette or paper tray area the next step is removing the paper tray. Shine your flashlight into the paper feed area and see if there are any pieces of paper torn off inside or something blocking the paper path. Now that you have ruled out a blocked paper path, you can clean the feed roller(s).Tools Required:Flashlight, strong cotton towel (so it will not rip off in the machine), WD-40 or Rubber roller rejuvenator. Note: Never use alcohol to clean rollers. It dries out the tread and the remaining tread will get ripped off and then it still will not feed. Use WD-40 it works great!Cleaning the rollers:Shine your flashlight into the paper feed area and locate the rubber rollers that feed the paper in. Grab your towel and saturate it with cleaning fluid. This can be WD-40 or your favorite roller rejuvenator. Start by cleaning the roller and spinning it all the way around not missing any of the surfaces of the roller. Then go over it again with the dry part of the towel. As I said there are many different types. Some have a set of three rollers. One Pre-feed roller, this pushes the paper into the other rollers. One feed roller and one separation roller. Others have a half moon style. These are harder to clean because they have a clutch system that keeps it at home position when not feeding.WARNING: If you try and turn these to clean them you will damage the clutch mechanism! There are two ways you can clean these types. First you can actuate the clutch by pushing down on the solenoid or release lever. This sometimes can be hard to get to. You can also start the copy process and shut off the machine exactly when the feed roller engages. This takes some patience and practice but it is better than damaging the clutch. Once you get it where you can clean the roller repeat the procedure above.Some alternatives to replacing feed rollers: There is a material called feed roller tape. I have used it when I didn't have the right roller in my car stock. It works with some styles mainly half moon styles. Just peel off the adhesive and wrap it around the worn roller surface. They also have some that stretch over the old rollers. I have never used this but I have been told it will get you up and running. On old copiers or printers that you can no longer get parts for you can apply clear silicon on the feed surface and let it dry twenty four hours. It works but I am inclined to use the real thing. You can also use generic rollers manufactured for almost all equipment. I have mixed feeling about these because I have had to go back and change them again later. For the best repair I use genuine OEM feed rollers. They are still inexpensive and they will last you longer and you will have fewer headaches.Feed RollersThere are many types of rollers and feed systems. Here are some common feed rollers with their part numbers. Rollers will normally come in a maintenance kit but they may need to be replaced approximately half way through the maintenance kit cycle.HP LJ-4000 laser printerFeed RollersRG5-2651-000CN x 2Note: These are very easily replaced. Just unsnap them and replace them with the new roller.Toshiba E-Studio 350/450 Photocopier Paper Feed Rollers 44201807000 x2, 4400669910Note: These take a little more work. First you need to remove the paper feed assembly and then you can get to the clips that hold them on.I hope this has helped you complete your print or copy job. Please remember that this article is just a quick fix and not a long term solution. Be sure and call your repair person to fix it correctly.
Laser Printer Repair Costs and How to Minimize ThemMississauga
Looking for HP Copier Repair Service Mississauga?Canon copy machines come in varied types and sizes and are trusted that they deliver high quality work in bulk in a very short time. They are in two categories; black and white only and color copy machines. It is therefore important for you to determine in advance which one will be more fitting for the kind of work that you have to do.They also differ in sizes such that there are those that you can just place on a table top and others that will require quite some considerable amount of space. It is upon you to decide depending on the space you have to spare for the machine and also depending on the work load that you have. You also need to think about the specifications of the Canon copy machines in case you need to perform multiple tasks at the same time and probably this could lead you to think about the digital ones.With quality products comes a need to cough a little bit more money, but it is worth it if you are assured of reliability and durability. If you can afford to part with a little bit more dollars, you might then want to consider one of the latest editions of the Canon copy machines which are more value loaded. Before purchase though you need to run a test on them and probably get the sales personnel at the sales stores to clarify any misinformation you may have. once this is done, your are ready to make payment and have your machines delivered to your office.
Konica Minolta Copy Machine Repair Service Mississauga NY – Office Equipment Solutions
We carry multiple brands and a wide range of new copiers, used copiers, and refurbished copiers to fit every need, in both color or black and white models. From desktop to copy room, and every size in between, you can be sure we’ll have the right office copier at the right price for you. HP Copier Repair Service Mississauga
We’ve also got you covered for copier service, too. Our trained technicians will provide you with prompt, professional service on your office copiers. From one copier to an entire fleet, our service programs and maintenance agreements are customizable to fit your exacting needs.