Ricoh Laser Printer Repair in Niagara Falls NYIt usually happens when you need to print out or copy important papers when your printer or copier breaks down and leaves you surprised and frustrated. It doesn't matter what is the brand: Lexmark, Zebra, Dell, HP, Brother, Toshiba, Konica Minolta, Kyocera, or Panasonic - it happens to every brand sooner or later. Since copiers and printers are made of an extensive array of parts (the most problematic parts being plotters, toners, belts, carriage belts, trailing belts) and, it will be an arduous job to find a solution and put your printer or copier back into a working condition. You should think about calling professionals instead of trying to come up with a solution by yourself. Sometimes, printers jam the copiers and papers stop copying for no apparent reason but as in everything else there is a reason but not so obvious for an untrained mind. Usually, the repair firms charge unimaginable prices for their services and often, you will be better off if you buy a brand-new printer or copier which is usually will cost you much less than paying for those repair services.It's not surprising for repair firms to charge the high prices for the services as there are myriads of details in the printer and copier which require years of work experience for the specialist to be able to get through all the details and eventually, to find a problem and fix it. On the other side, those who don't wish to cover the repair invoice will have to buy a new machine. Buying a new printer or copier is associated with different set of problems that are obvious for someone who has been working in this industry for decades. The problem is that if you choose to buy a new printer or copier the cost of which is lower than the price for its repair then you will face the same tech problems which you faced before buying this machine: in other words, low-priced printers and copiers are made of low-quality materials and usually, they have comparatively shorter life-time than its high-end counterparts.Those who choose to ask the repair companies for help and don't want to buy another low-quality printer or copier are the ones who make wiser choice. Besides the fact that repair services will remove the stress that usually comes along with an unexpected machine breakdown, they will give you professional suggestions to keep your printer or copier in a desirable working condition. They will provide you with the tips that you won't find on internet. In addition, repair services will also handle the printer/copier resources like sheets and ink cartridges etc.
- Copier Sales
- Copier Repair Service
- Laser Printer Sales
- Laser Printer Repair Service
- Office Equipment Supplier
Copier & Laser Printer Brands We Service & Support
XEROX • CANON • BROTHER • HP • KYOCERA • RICOH • KONICA MINOLTA • COPYSTAR • SAMSUNG • SHARP • MOST OTHER MAJOR BRANDS
Ricoh Laser Printer Repair Niagara Falls – We’ve been providing business copiers for a long time, and over the years, the most common complaint we hear about typical copier sales people is that they are pushy, fast-talking, and might as well sell used cars instead of copiers (no offense, car guys).
When it’s time to buy a copier, customers are often presented with complicated agreements, hard deadlines, limited time offers, and extra features they don’t need! This leaves you with an over priced, over hyped copier. Don’t pay extra!
We want to be the best service provider you’ve ever had! Give us a try and see why our customers give us such great reviews. With our knowledge and experience, we can help you choose the right digital copier for your needs.
Choose a fully loaded multifunctional unit for printing, copying, scanning, and fax – or something more basic. There are many options to choose from, enabling you to custom outfit your copier to meet your exact needs for your wireless network, Ethernet, duplex printing, wide format, or other special needs. We also have repair service and toner cartridge consumables available too, for monochrome and color copiers.
Canon Copy MachinesIt hasn't always been so easy to make copies. We now can just walk up to a photocopier machine and press the print button and we instantly receive perfectly replicated copies of our original. Just forty seven years ago the copy machine was a pen and some sheets of carbon paper. Instead of pushing a button you had to write and write and then write some more! Just before the 60's this was a reality and carbon paper was a big seller. Chester Carlson, a patent attorney knew how much of a pain it was to continue rewriting everything by hand because Carlson had arthritis. Carlson had an idea of designing a machine that would automatically make copies, so he didn't have to do all of that copying by hand.Think about doing your job without a copier. You probably will have a hard time imagining it. Did you know that most manufacturers didn't think that a copier would be of much use? Chester tried for years to get people to catch his vision but nobody was interested. Between 1939 and 1944, Carlson got the thumbs down by many corporations, including IBM, Kodak, General Electric, and RCA.In 1937 Chester invented a process called electrophotography. They renamed it Xerography in 1938. He figured out that if the image of an original document was projected onto a photoconductive surface, current would flow only in the areas where the light shined on it. The first copy was made with a sulfur coating on a zinc plate. He took a glass microscope slide and wrote on it 10-22-38 ASTORIA with ink. He then pulled down the shade to darken the room. He built an electrostatic charge buy rubbing the sulfur surface with a handkerchief. Then the slide was placed on the surface and a light was shined on it for few seconds. He then sprinkled lycopodium powder on the sulfur coating. Gently blowing on the surface, the loose powder blew off and all that was left was the inscription, 10-22-38 ASTORIA. 10-22-38 is the date that the first photocopy was made. Astoria was the location.The Birth of Xerox The company that decided to take a chance on Carlson's dream was the Haloid Company. Haloid was a photo-paper manufacturer in New York. Guess what they came to be known as? Yes, the Xerox Corporation. In 1960 the first office copier was produced. It was the Xerox model 914. It was the first office copier that could make copies on plain paper.Being a copier repairman for over twenty years I have seen the good copiers with the bad copiers. I began working on copiers in 1983. The copiers that I began working with were messy and they would not last long in between servicing. The prices for the machines were very high especially for higher volume copiers. There were some interesting ways of transporting the paper through the machine like the Sharp SF-740. It grabbed the paper with two gripper devices that were driven with chains. This machine fused the toner to the paper with a toaster oven type device.Some people may even remember having to pour toner into the copier from a bottle. But today's copiers have a cartridge system that works well. They keep most of the toner inside the copier, not on you best pair of slacks or your dress. They have rollers for fusing the toner to the paper and have very sophisticated paper feed and transport systems that help reduce jamming problems. Digital copiers are now on the market. Now you can not only copy, but print, scan and even fax with them. Perhaps the most revolutionary change in the industry is the full color copier. The sales of full color copiers have really started to explode. There are a lot of new and exciting products being introduced and the quality is really quite good. We have come along way from Carlson's '10-22-38 ASTORIA. I just can't help to think what the future will bring us. What will the copier of the year 2020 look like?Chestor F. Carlson (1906-1968). Chester F. Carlson was born on February 8, 1906 in city of Seattle. His father was a barber and they came to live in San Bernardino, California. He was a bright young man and was curious of how things worked. Carlson's mom died when he was seventeen years old. They say that Carlson donated $100 million to charity before he passed away in 1968.
Laser PrinterNiagara Falls
Looking for Ricoh Laser Printer Repair Niagara Falls?Are you considering purchasing a used copier printer all-in-one office equipment from a company out or going out of business? You need to think a minute about this. The company is going out of business for a reason and the majority of the time it's because of cash flow.Do you think they would spend their last few dollars having their copier repaired or maintained? Buying a used copier printer from a company going out of business is like buying a used car from a dirt lot 100 miles from a city. It's buyer beware and check your pockets before you leave because the seller will be gone!Last week we received 11 service calls from companies who purchased used copier printers multi-function office equipment from a business going out of business. This is how most of the copier repair calls start: "Hi, I need somebody to come out to clean a copier because we are getting lines." or "Hi. we are getting paper jams and we need it fixed right away." Then the person tells us they just purchased the used copier at a great price from a business that failed. Now the company is gone and they can not get a hold of them.Do you think once you buy the used copier they will help you if a problem occurs? They sold you the used copier printer, closed the business and left town for the mountains.The bottom line is that the average repair on the clients' copiers cost more than what they paid for the used copier.How to prevent this problem:1. Contact a company who specializes in the used copier printer. Do not ask you neighbor doctor, nephew lawyer or next door electrician. Get a certified technician to review it.2. Have the copier repair tech check the following: last copier maintenance cycle, the amount of life left of the toner, developer and drum. Get an unbiased view from a technician who will give you a report before you spend a dime on the refurbished or used printer copier.3. Better yet, get the used copier printer from actual copier printer dealer. You may pay a few dollars more but it will prevent exposing yourself to problems and hundreds of dollars in repair bills later. May companies will give you a quick over the phone estimates of costs to check the equipment before you buy it. It only costs you a phone call and could save you hundreds of dollars!
Copier Lease Niagara Falls NY – Office Equipment Solutions
We carry multiple brands and a wide range of new copiers, used copiers, and refurbished copiers to fit every need, in both color or black and white models. From desktop to copy room, and every size in between, you can be sure we’ll have the right office copier at the right price for you. Ricoh Laser Printer Repair Niagara Falls
We’ve also got you covered for copier service, too. Our trained technicians will provide you with prompt, professional service on your office copiers. From one copier to an entire fleet, our service programs and maintenance agreements are customizable to fit your exacting needs.